Kia Sportage: Relay Box (Passenger Compartment): Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Fuses And Relays / Relay Box (Passenger Compartment): Repair procedures

Inspection

Fuse

1.	Be sure there is no play in the fuse holders, and that the fuses are held securely.

2.	Are the fuse capacities for each circuit correct?

3.	Are there any blown fuses? If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

SJB Connectors

Inspection

1.	The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes.

2.	To diagnose the SJB function, select the vehicle model, BCM and SJB.

3.	To consult the present input/out value of SJB, "Current DATA". It provides information of SJB input/output conditions.

4.	To perform functional test on SJB outputs, select "Actuation Test"

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to the BD group - "Crash pad")

3.	Remove the SJB (A) (Smart Junction Box) after removing bolt, nuts (2EA) and connectors.

Installation

1.	Install SJB (Smart Junction Box).

2.	Connect the SJB connectors.

3.	Install the crash pad lower panel.

Relay Box (Passenger Compartment): Description and Operation

Description SJB (Smart Junction Box) 1. Specification ItemRequirementRemarkRated voltageDC 12V?Voltage rangeDC 9 ~ 16VNormal operating in this rangeStorage temperature-40°C ~ +80°C?Operating...

ICM (Integrated Circuit Module) Relay Box: Components and Components Location

Component Pin Information NoConnector ANoConnector A1Rear wiper motor (Power)11IPM (Rear wiper 15A)2IPM12Rear wiper motor (Signal)3Stop lamp13-4-14-5ESC unit15GND6U_H_Box (ABS 7.5A fuse)16IPM (B...

Kia Sportage: Relay Box (Passenger Compartment): Repair procedures

See also:

Categories