Kia Sportage: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Emission Control System / Crankcase Emission Control System / Repair procedures
| Inspection |
| 1. |
After disconnecting the vapor hose from the PCV valve, remove the PCV valve. |
| 2. |
Reconnect the PCV valve to the vapor hose. |
| 3. |
Run the engine at idle, then put a finger over the open end
of the PCV valve and make sure that intake manifold vacuum can be felt.
|
| 4. |
If the vacuum is not felt inspect PCV operation, if operating correctly clean or replace the vapor hose. |
Schematic Diagram...
Schematic Diagrams
Operation Principle...
Positive Crankcase Ventilation (PCV) Valve: Description and Operation
See also:
Shift pattern indicator
This indicator displays which automatic transaxle shift position is selected. ...
Headlight escort function
The headlights (and/or taillights) remain on for approximately 5 minutes after
the ignition key is removed or turned to the ACC or LOCK position. However, if the
driver’s door (and tailgate) is ...
Power Seat Motor: Repair procedures
Inspection
Power Seat Motor
1.
Remove the front seat.
(Refer to BD group - "Front seat")
2.
Disconnect the connectors for each motor.
3.
With the battery connected directly to the motor ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0664