Kia Sportage: Power Seat Motor: Repair procedures - Seat Electrical - Body Electrical SystemKia Sportage: Power Seat Motor: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Seat Electrical / Power Seat Motor: Repair procedures

Inspection
Power Seat Motor
1.
Remove the front seat.
(Refer to BD group - "Front seat")
2.
Disconnect the connectors for each motor.

3.
With the battery connected directly to the motor terminals, check if the motors run smoothly.

4.
Reverse the connections and check that the motor turns in reverse.
5.
If there is an abnormality, replace the motors.
Components and Components Location
Component Location 1. Slide motor2. Rear height motor3. Reclining motor4. Power seat switch5. Reclining switch6. Lumbar support switch7. Lumbar support motor...
Power Seat Control Switch: Repair procedures
Inspection 1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch. Remo...
See also:

Room Lamp: Repair procedures
Inspection 1. Remove the room lamp assembly connector then check for continuity between terminals. Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) fro ...

Child restraint system
Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident s ...

ESC OFF Switch: Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. 3. Check the continuity between the switch terminals as ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.053