Kia Optima Manuals

Kia Sportage: Room Lamp: Repair procedures - Lighting System - Body Electrical SystemKia Sportage: Room Lamp: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Lighting System / Room Lamp: Repair procedures

Inspection
1.
Remove the room lamp assembly connector then check for continuity between terminals.

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.

   
Take care not to damage the part (B).
3.
Loosen the fixing screws (2EA).
4.
Remove the room lamp assembly (A) after disconnecting the connector (B).

Installation
1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lamp lens after assembling the bulb.
Turn Signal Lamp: Repair procedures
Removal Rear Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to BD group - "Rear Bumper") 3. Disconnect the connector. Remove the rear...
Overhead Console Lamp: Repair procedures
Inspection Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. No.DescriptionNo.Descrip...
See also:

Rear Cross-Traffic Collision-Avoidance Assist Settings
Rear Cross-Traffic Safety Driver Assistance Parking Safety Rear Cross-Traffic Safety With the Kia ...

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left on the tire. Replace the tire when ...

Troubleshooting
Troubleshooting SymptomPossible causeRemedyOne lamp does not light(all exterior)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not lightBulb burned out ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0851