Kia Sportage: Turn Signal Lamp: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Lighting System / Turn Signal Lamp: Repair procedures

Removal

Rear Turn Signal Lamp

1.	Disconnect the negative (-) battery terminal.

2.	Remove the rear bumper. (Refer to BD group - "Rear Bumper")

3.	Disconnect the connector. Remove the rear turn signal lamp (A) after loosening 5 screws.

4.	Replace the bulb (A) of rear turn signal lamp. ? If replacing the bulb only, you could work it without removing the rear bumper.

Door Mirror Turn Signal Lamp

1.	Disconnect the negative (-) battery terminal.

2.	Remove the mirror from the mirror holder. Be careful not to damage to the clip.

3.	Remove the door mirror turn signal lamp (A) after disassembling screw and connector.

Installation

Rear Turn Signal Lamp

1.	Install the bulb to the rear turn signal lamp assembly.

2.	Install the rear turn signal lamp to the rear bumper.

Door Mirror Turn Signal Lamp

1.	Install the door mirror turn signal lamp to the door mirror.

2.	Install the door mirror.

3.	Connect the battery terminal (-).

Head Lamps: Repair procedures

Removal Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off. ...

Room Lamp: Repair procedures

Inspection 1. Remove the room lamp assembly connector then check for continuity between terminals. Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) fro...

Kia Sportage: Turn Signal Lamp: Repair procedures

See also:

Categories