Kia Optima Manuals

Kia Sportage: Transaxle Oil Temperature Sensor: Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Sportage: Transaxle Oil Temperature Sensor: Description and Operation

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor: Description and Operation

Description
Transaxle oil temperature sensor monitors the automatic transaxle fluid''s temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.

Transaxle Control Module (TCM): Repair procedures
Inspection TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. ...
Transaxle Oil Temperature Sensor: Specifications
Specifications ? Type: Negative Thermal Coefficient Type Temp.[(°C)°F]Resistance (k?)(-40)-4048.1(-20)-4.015.6(0)32.05.88(20)68.02.51(40)104.01.11(60)140.00.61(80)176.00.32(100)212.00.18(120)2...
See also:

Engine And Transaxle Assembly: Repair procedures
Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connec ...

Cluster ionizer: Components and Components Location
Component Location ...

Propeller Shaft: Repair procedures
Replacement 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts. Tightening torque : 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6 ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0604