Kia Optima Manuals

Kia Sportage: Windshield Deicer Switch: Repair procedures - Windshield Deicer - Body Electrical SystemKia Sportage: Windshield Deicer Switch: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Windshield Deicer / Windshield Deicer Switch: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel.
(Refer to BE - "Audio")
3.
Remove the heater and A/C controller (A) after disconnecting the connector (B).

   
Take care not to damage the hook when removing the heater and A/C controller.
Installation
1.
Install the heater and A/C controller.
2.
Install the center fascia panel.
Inspection
1.
The windshield deicer switch inputs can be checked using the GDS.
2.
To check the input value of windshield deicer switch, select option "BCM".
3.
Select option "Current Data".

4.
To check the input value of windshield deicer switch in force mode, select option.

Windshield Deicer: Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to the wiper) 2. Disconnect the windshield deicer connector (A) from the wiper motor linkage. 3. Check for continuity between the terminals...
Rear Glass Defogger
...
See also:

Components and Components Location
Component Location 1. Rear wiper motor assembly2. Head cap3. Rear wiper motor mounting bolt4. Rear wiper motor mounting hole5. Pad cap6. Hexagonal nut7. Cover8. Rear wiper arm & blade9. Rear ...

Ambient Sensor: Description and Operation
Description 1. The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lowe ...

Map lamp
The light will turn on and off as below if the switch is pressed. The light will turn off if the button is pressed again. • Push the lens to turn the map lamp on or off. This light produces a s ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.078