Kia Sportage: DBC Switch: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Brake System / ESC(Electronic Stability Control) System / DBC Switch: Repair procedures
| Inspection |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
| 2. |
Remove the crash pad side switch assembly.
|
| 3. |
Check the continuity between the switch terminals as the DBC switch is engaged.
|
Description
The DBC function is the acronym word of Downhill Brake
Control function. When a vehicle goes down the hill, just pushing the
DBC switch enables the car to keep its vehicle''s speed ...
DBC Switch: Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor
Driven Power Steering) and it sends messages to HECU through CAN
communication line.
The SAS is used to determine turnin...
Steering Angle Sensor: Description and Operation
See also:
Air intake control
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated air posi ...
Cruise Control Switch: Repair procedures
Removal and Installation
1.
Disconnect the battery (-) terminal.
Tightening torque:
Without battery sensor :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
With battery sensor :
4.0 ~ 6.0N ...
Climate Seat: Repair procedures
Removal
1.
Remove the front seat assembly.
(Refer to BD group - "Front Seat")
2.
Remove the seat back cover and cushion cover.
(Refer to BD group - "Front Seat")
3.
Remove the ventilatio ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0576