Kia Sportage: Horn - Body Electrical SystemKia Sportage: Horn

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Body Electrical System / Horn

Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after removing 3 screws.     Take care not to damag...
Components and Components Location
Component Location 1. Horn switch2. Horn relay (Engine room compartment)3. Horn (Low pitch)4. Clock spring...
See also:

SS-A Solenoid Valve(ON/OFF): Description and Operation
Description SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...

Input Speed Sensor: Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the valve body assembly. (R ...

Junction Crossing function: (if equipped)
When Junction Crossing detects a potential collision while the Kia Sportage is crossing an intersection, it responds in stages. Depending on the situation, the system may issue a warning, assist wi ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0547