Kia Sportage: Manifold Absolute Pressure Sensor (MAPS): Schematic Diagrams - Engine Control System - Engine Control / Fuel SystemKia Sportage: Manifold Absolute Pressure Sensor (MAPS): Schematic Diagrams

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS): Schematic Diagrams

Circuit Diagram

Manifold Absolute Pressure Sensor (MAPS): Specifications
Specification Pressure[kPa (kgf/cm?, psi)]Output Voltage (V)20.0 (0.20, 2.9)0.7946.7 (0.47, 6.77)1.84101.3 (1.03, 14.7)4.0...
Manifold Absolute Pressure Sensor (MAPS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur...
See also:

ESC (Electronic Stability Control) indicator
The ESC indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds. When the ESC is on, it monitors the driving conditions and under normal ...

Using the Smart Key (If Equipped)
Remote start button Lock button Unlock button ...

Power Window Motor: Repair procedures
Inspection Front Power Window Motor 1. Remove (-) negative battery terminal. 2. Remove the front door trim. (Refer to the BD group - "Front door") 3. Disconnect the connector from the m ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0603