Kia Sportage: Muffler: Repair procedures

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Mechanical System / Intake And Exhaust System / Muffler: Repair procedures

Removal and Installation

1.

Remove the front muffler (A).

Tightening torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

2.

Remove the catalytic converter (B) after removing the rear oxygen sensor (A).

Tightening torque:

Oxygen sensor (A): 44.1 ~ 49.0 N.m (4.5 ~ 5.0 kgf.m, 32.5 ~ 36.2 lb-ft)

Nuts (B): 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.

Remove the center muffler (A).

Tightening torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

4.	Remove the main muffler (A).

5.

Installation is the reverse order of removal.

When installing, replace with new gaskets.

Muffler: Components and Components Location

Components 1. Front muffler2. Catalytic converter3. Center muffler4. Main muffler5. Gasket...

Engine Electrical System

...

See also:

Immobilizer Control Unit: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column assembly. (Refer to the ...

Fender: Repair procedures
Replacement • When removing and installing the fender, an assistant is necessary. • Be careful not to damage the fender and body. • Whe ...

Rear Wheel Speed Sensor: Repair procedures
Removal 1. Remove the rear wheel speed sensor mounting bolt (A). Tightening torque: 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft) 2. Remove the luggage side trim the disconnect the r ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.0561