Kia Sportage: Oil Pressure Switch: Repair procedures
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Mechanical System / Lubrication System / Oil Pressure Switch: Repair procedures
| Inspection |
| 1. |
Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
|
| 2. |
Check the continuity between the terminal and the body when
the fine wire is pushed. If there is continuity even when the fine wire
is pushed, replace the switch. |
| 3. |
If there is no continuity when a 50kPa (0.50kgf/cm?, 7.25psi) is applied through the oil hole, the switch is operaing properly.
Check for air leakage. If air leaks, the diaphragm is broken. Replace it.
|
Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap to speed draining.
2.
Disconnect the oil cooler coolant hoses (A).
3.
Remove the oil filter (A).
4.
Loo...
Oil Cooler: Repair procedures
Intake And Exhaust System
See also:
Crankshaft Position Sensor (CKPS): Description and Operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft
position and is one of the most important sensors of the engine control
system. If there is no CKPS signal input, the engine ...
Seat height (for driver’s seat)
Pull the rear portion of the control switch up to raise or press down to lower
the seat cushion. Release the switch once the seat reaches the desired position. ...
Bulb replacement precautions
Before replacing a bulb, park the Kia Sportage in a safe place, switch off the engine, apply the parking brake firmly
and disconnect the negative battery terminal. Use only a replacement bulb with ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0473