Kia Optima Manuals

Kia Sportage: Specifications - Engine Electrical SystemKia Sportage: Specifications

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Electrical System / Specifications

Specifications
Ignition System
Items
Specifications
Ignition coil
Primary resistance
0.62 ± 10 % (?)
Secondary resistance
7.0 ± 15 % (k?)
Spark plugs
Type
ZXU20HCR8
Gap
0.7 ~0.8 mm (0.0276 ~ 0.0315 in.)

Starting System
Items
Specifications
Starter
Rated voltage
12V, 1.2kW
No. of pinion teeth
11
No-load characteristics
Voltage
11.5V
Ampere
105A, MAX
Speed
2,950rpm, MIN

Charging System
Items
Specifications
Alternator
Type
Battery voltage sensing
Rate voltage
13.5 V, 130A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC regulator built-in type
Regulator setting voltage
External mode
ECU control
Internal mode
14.55 ± 0.3V
Temperature compensation
External mode
ECU control
Internal mode
-7 ± 2mV / °C
Battery
Type
54-26GL
Cold cranking amperage [at -18°C(-0.4°F)]
600A
Reserve capacity
113min
Specific gravity [at 25°C(77°F)]
1.280 ± 0.01

   
•
COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
•
RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C(80.1°F).
   

Engine Electrical System
...
Special Service Tools
Special Service Tools Tool (Number and name)IllustrationUseAlternator pulley remover wrench(09373-27000)Removal and installation of alternator pulley...
See also:

Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts.The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupan ...

Windshield Deicer Switch: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel. (Refer to BE - "Audio") 3. Remove the heater and A/C controller (A) after disconnecting the con ...

Rail Pressure Sensor (RPS): Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.053