Kia Sportage: TPMS Receiver: Schematic Diagrams - Tire Pressure Monitoring System - Suspension SystemKia Sportage: TPMS Receiver: Schematic Diagrams

Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Suspension System / Tire Pressure Monitoring System / TPMS Receiver: Schematic Diagrams

Schematic Diagrams
TPMS Receiver Circuit Diagram

Harness Connector

Pin
Description
1
Battery
2
CAN_High
3
GND
4
-
5
-
6
-
7
IGN
8
CAN_Low
9
-
10
-
11
-
12
-

TPMS Receiver: Description and Operation
Description 1. Mode (1) Virgin State • The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state. • In this state, there...
TPMS Receiver: Repair procedures
Replacement     When the receiver first arrives for replacement: a. It will be in Virgin State. b. It will not be configured for any specific platform. c. It will...
See also:

Battery: Repair procedures
Removal and Installation 1. Remove the battery. (1) Disconnect the battery negative terminal (A). Tightening torque : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) (2) Disconnect the ...

Bulb replacement precautions
Before replacing a bulb, park the Kia Sportage in a safe place, switch off the engine, apply the parking brake firmly and disconnect the negative battery terminal. Use only a replacement bulb with ...

Front Bumper: Repair procedures
Replacement     • Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trip pieces to without marring the surface ...

Categories

Copyright © sl.kispmanual.com 2014-2026 - 0.067