Kia Sportage: Water pump: Components and Components Location
Kia Sportage Service & Repair Manual (3rd Generation, SL; 2011-2016) / Engine Mechanical System / Cooling System / Water pump: Components and Components Location
| Components |
| 1. Water pump pulley 2. Water pump sub assembly 3. Water pump gasket 4. Water pump cover 5. Water pump cover gasket | 6. O-ring 7. Water inlet pipe 8. Water temperature control assembly 9. Water inlet fitting 10. Engine coolant temperature sensor | 11. Thermostat 12. Thermostat gasket 13. Throttle body coolant hoses 14. Oil cooler coolant hoses |
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kg...
Radiator: Repair procedures
Removal and Installation
1.
Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to drain with speed.
2.
Remove the drive belt (A) after turning the drive belt ten...
Water pump: Repair procedures
See also:
Battery
For best battery service
Make sure the battery is securely mounted.
Keep the top of the battery clean and dry.
Keep the battery t ...
Limitations of Smart Cruise Control
Smart Cruise Control (SCC) may not operate as intended in certain conditions. Detection and vehicle control can be
affected by the sensors, the Kia Sportage’s surroundings, the road surface and t ...
Heating
1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired ...
Categories
- Home
- Kia Sportage NQ5 (2022-2026) Owner's Manual
- Kia Sportage QL (2015-2019) Owner's Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owner's Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © sl.kispmanual.com 2014-2026 - 0.0702